- Postcode districts
- TS23
- Nearby
- Stockton-on-Tees, Middlesbrough and Thornaby-on-Tees
- Guide price
- £800–£2,200
- Typical time on site
- 1–2 working days
- Water
- Moderately hard across most of County Durham
- Survey
- Free, at your home
What does a replacement bath cost in Billingham?
For Billingham, our guide range for a replacement bath is £800 to £2,200 including VAT. Prices in North East England run at about 10% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- Silicone and tile repairs
Shower bath
- P or L-shaped shower bath
Freestanding bath
- Floor or wall-mounted filler
Guide prices for Billingham including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Billingham
We cover every part of Billingham, including TS23, and nearby Stockton-on-Tees (1.8 miles) and Middlesbrough (2.4 miles).
Homes in and around Billingham vary, so we look at the floor, the walls and the water system before we price anything. If the bath in your Billingham home is the only thing letting the bathroom down, a swap in one or two days avoids a full refit. Before a new bath is ordered for a Billingham home, we measure the stairs and landing as well as the opening.
Supplies across most of County Durham are moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
Decisions to make first
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Taps or filler
Deck taps on the rim are the simplest swap. Wall-mounted taps or a bath filler look cleaner but mean opening the wall, and an overflow filler hides the spout altogether.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
