- Postcode districts
- BL9, M26, M45
- Nearby
- Whitefield, Prestwich and Bury
- Guide price
- £850–£2,400
- Typical time on site
- 1–2 working days
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does a replacement bath cost in Radcliffe?
For Radcliffe, our guide range for a replacement bath is £850 to £2,400 including VAT. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- Silicone and tile repairs
Shower bath
- P or L-shaped shower bath
Freestanding bath
- Floor or wall-mounted filler
Guide prices for Radcliffe including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Radcliffe
We cover every part of Radcliffe, including BL9, M26 and M45, and nearby Whitefield (1.3 miles) and Prestwich (2.6 miles).
Homes in and around Radcliffe vary, so we look at the floor, the walls and the water system before we price anything. Survey visits in Radcliffe cover the bath, the tiles around it and the waste route, so the quote reflects your bathroom rather than a standard job. If you are in Radcliffe and considering a freestanding bath, the survey includes a check of the floor and joists before you choose.
Supplies across most of Greater Manchester are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- Leak testing at the waste, overflow and taps, taking the old bath away and a final clean
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
Decisions to make first
Taps or filler
Deck taps on the rim are the simplest swap. Wall-mounted taps or a bath filler look cleaner but mean opening the wall, and an overflow filler hides the spout altogether.
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
