What does a replacement bath cost in Gwent?
Our guide range in Gwent is £850–£2,300 including VAT. Prices in Gwent run at about 7% below the UK guide, based on Wales labour rates.
Like-for-like bath
- Silicone and tile repairs
Shower bath
- P or L-shaped shower bath
Freestanding bath
- Floor or wall-mounted filler
Guide prices for Gwent including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Gwent?
Water hardness varies across Gwent: some supplies are soft, others moderately hard or hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier. Landlords with properties in Newport can usually have a bath replaced between tenancies in one to two working days.
What the job includes
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- Supply of the new bath, taps or filler, waste and overflow, and bath panel
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- Levelling the bath on adjustable feet or a cradle, with timber battens fixed to the walls under the rim
- Leak testing at the waste, overflow and taps, taking the old bath away and a final clean
Decisions to make first
Bath panel
Acrylic panels are cheap and easy to clean; wood-effect panels match fitted furniture; a tiled panel on a frame looks built-in but needs an access hatch for the waste.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Rules that apply in Wales
Replacing a bath in an existing bathroom does not need planning permission, and a straight swap is not normally building regulations work. New taps or a filler must meet the water fittings rules where you live, including backflow protection. If the new bath is much heavier than the old one, such as a cast-iron or stone resin freestanding bath, the floor needs checking, and strengthening joists is structural work that may need building control approval.
Wales sets its own building regulations, including a Part P with a wider list of notifiable electrical work than England. A like-for-like bath swap is not usually building regulations work, but speak to building control before strengthening a floor for a heavy bath.