What does a replacement bath cost in Herefordshire?
Our guide range in Herefordshire is £900–£2,400 including VAT.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for Herefordshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Herefordshire?
Supplies across most of Herefordshire are moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are in Hereford and considering a freestanding bath, the survey includes a check of the floor and joists before you choose.
What the job includes
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- Levelling the bath on adjustable feet or a cradle, with timber battens fixed to the walls under the rim
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Leak testing at the waste, overflow and taps, taking the old bath away and a final clean
Decisions to make first
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Taps or filler
Deck taps on the rim are the simplest swap. Wall-mounted taps or a bath filler look cleaner but mean opening the wall, and an overflow filler hides the spout altogether.
Rules that apply in England
Replacing a bath in an existing bathroom does not need planning permission, and a straight swap is not normally building regulations work. New taps or a filler must meet the water fittings rules where you live, including backflow protection. If the new bath is much heavier than the old one, such as a cast-iron or stone resin freestanding bath, the floor needs checking, and strengthening joists is structural work that may need building control approval.
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.