- Postcode districts
- PR6, PR7
- Nearby
- Horwich, Leyland and Darwen
- Guide price
- £850–£2,400
- Typical time on site
- 1–2 working days
- Water
- Soft across most of Lancashire
- Survey
- Free, at your home
What does a replacement bath cost in Chorley?
Our guide price for a replacement bath in Chorley is £850–£2,400 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for Chorley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Chorley
We cover every part of Chorley, including PR6 and PR7, and nearby Horwich (4.3 miles) and Leyland (4.4 miles).
In Chorley, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If the bath in your Chorley home is the only thing letting the bathroom down, a swap in one or two days avoids a full refit. For Chorley homes with a shower over the bath, a shower bath and fixed screen keeps the floor drier than a curtain.
Water across much of Lancashire is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Leak testing at the waste, overflow and taps, taking the old bath away and a final clean
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
Decisions to make first
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Taps or filler
Deck taps on the rim are the simplest swap. Wall-mounted taps or a bath filler look cleaner but mean opening the wall, and an overflow filler hides the spout altogether.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
