What does a replacement bath cost in North Yorkshire?
Our guide range in North Yorkshire is £850–£2,300 including VAT. Prices in North Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for North Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in North Yorkshire?
Water across much of North Yorkshire is moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier. If the bath in your York home is the only thing letting the bathroom down, a swap in one or two days avoids a full refit.
What the job includes
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- Levelling the bath on adjustable feet or a cradle, with timber battens fixed to the walls under the rim
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
Decisions to make first
Bath panel
Acrylic panels are cheap and easy to clean; wood-effect panels match fitted furniture; a tiled panel on a frame looks built-in but needs an access hatch for the waste.
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Taps or filler
Deck taps on the rim are the simplest swap. Wall-mounted taps or a bath filler look cleaner but mean opening the wall, and an overflow filler hides the spout altogether.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Rules that apply in England
Replacing a bath in an existing bathroom does not need planning permission, and a straight swap is not normally building regulations work. New taps or a filler must meet the water fittings rules where you live, including backflow protection. If the new bath is much heavier than the old one, such as a cast-iron or stone resin freestanding bath, the floor needs checking, and strengthening joists is structural work that may need building control approval.
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.