- Postcode districts
- NE23, NE24
- Nearby
- Bedlington, Ashington and Cramlington
- Guide price
- £800–£2,200
- Typical time on site
- 1–2 working days
- Water
- Soft across most of Northumberland
- Survey
- Free, at your home
What does a replacement bath cost in Blyth?
In Blyth, a replacement bath typically costs £800–£2,200 including VAT, based on North East England prices. Labour costs in North East England put local prices at about 10% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for Blyth including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Blyth
We cover every part of Blyth, including NE23 and NE24, and nearby Bedlington (3.4 miles) and Ashington (4.1 miles).
Homes in and around Blyth vary, so we look at the floor, the walls and the water system before we price anything. Landlords with properties in Blyth can usually have a bath replaced between tenancies in one to two working days. If the bath in your Blyth home is the only thing letting the bathroom down, a swap in one or two days avoids a full refit.
Water across much of Northumberland is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- Supply of the new bath, taps or filler, waste and overflow, and bath panel
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
Decisions to make first
Taps or filler
Deck taps on the rim are the simplest swap. Wall-mounted taps or a bath filler look cleaner but mean opening the wall, and an overflow filler hides the spout altogether.
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.

