- Postcode districts
- DN12
- Nearby
- Mexborough, Maltby and Rawmarsh
- Guide price
- £850–£2,300
- Typical time on site
- 1–2 working days
- Water
- Moderately hard across most of South Yorkshire
- Survey
- Free, at your home
What does a replacement bath cost in Conisbrough?
As a guide, budget £850 to £2,300 including VAT for a replacement bath in Conisbrough; your written quote will pin it down. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for Conisbrough including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Conisbrough
As well as Conisbrough itself (DN12), we survey in Mexborough, Maltby and Rawmarsh.
Conisbrough gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you are in Conisbrough and considering a freestanding bath, the survey includes a check of the floor and joists before you choose. Survey visits in Conisbrough cover the bath, the tiles around it and the waste route, so the quote reflects your bathroom rather than a standard job.
Most of South Yorkshire has moderately hard water. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
Decisions to make first
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Shower bath
A P-shaped or L-shaped bath is wider at the shower end, giving room to stand and space for a fixed screen instead of a curtain.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
