- Postcode districts
- WS7
- Nearby
- Great Wyrley, Lichfield and Cannock
- Guide price
- £900–£2,400
- Typical time on site
- 1–2 working days
- Water
- Moderately hard across most of Staffordshire
- Survey
- Free, at your home
What does a replacement bath cost in Burntwood?
Guide price in Burntwood: £900–£2,400 including VAT, depending on the room and what you choose. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- Silicone and tile repairs
Shower bath
- P or L-shaped shower bath
Freestanding bath
- Floor or wall-mounted filler
Guide prices for Burntwood including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Burntwood
We work right across Burntwood — WS7 — and in neighbouring Great Wyrley and Lichfield.
Homes in and around Burntwood vary, so we look at the floor, the walls and the water system before we price anything. Landlords with properties in Burntwood can usually have a bath replaced between tenancies in one to two working days. For Burntwood homes with a shower over the bath, a shower bath and fixed screen keeps the floor drier than a curtain.
Water across much of Staffordshire is moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Levelling the bath on adjustable feet or a cradle, with timber battens fixed to the walls under the rim
- Leak testing at the waste, overflow and taps, taking the old bath away and a final clean
Decisions to make first
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
