- Postcode districts
- NE6, NE28, NE31
- Nearby
- Hebburn, Jarrow and Felling
- Guide price
- £800–£2,200
- Typical time on site
- 1–2 working days
- Water
- Soft across most of Tyne and Wear
- Survey
- Free, at your home
What does a replacement bath cost in Wallsend?
In Wallsend, a replacement bath typically costs £800–£2,200 including VAT, based on North East England prices. Prices in North East England run at about 10% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- Silicone and tile repairs
Shower bath
- P or L-shaped shower bath
Freestanding bath
- Floor or wall-mounted filler
Guide prices for Wallsend including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Wallsend
In Wallsend we cover NE6, NE28 and NE31; we also cover Hebburn, 1.4 miles away, and Jarrow.
Homes in and around Wallsend vary, so we look at the floor, the walls and the water system before we price anything. If you are in Wallsend and considering a freestanding bath, the survey includes a check of the floor and joists before you choose. If the bath in your Wallsend home is the only thing letting the bathroom down, a swap in one or two days avoids a full refit.
Water across much of Tyne and Wear is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply of the new bath, taps or filler, waste and overflow, and bath panel
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
Decisions to make first
Shower bath
A P-shaped or L-shaped bath is wider at the shower end, giving room to stand and space for a fixed screen instead of a curtain.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
