What does a replacement bath cost in West Sussex?
Our guide range in West Sussex is £1,000–£2,800 including VAT. Prices in West Sussex run at about 12% above the UK guide, based on South East England labour rates.
Like-for-like bath
- Silicone and tile repairs
Shower bath
- P or L-shaped shower bath
Freestanding bath
- Floor or wall-mounted filler
Guide prices for West Sussex including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in West Sussex?
- Crawley
- Worthing
- Bognor Regis
- Littlehampton
- Horsham
- Haywards Heath
- Chichester
- Burgess Hill
- East Grinstead
- Shoreham-by-Sea
- Emsworth
- Lancing
Supplies across most of West Sussex are hard. Taps, plug wastes and toilet pans scale up quickly, so chrome copes better than matt black, and a removable aerator is worth having. Hardness varies street by street, so check the figure for your postcode with your water supplier. Landlords with properties in Crawley can usually have a bath replaced between tenancies in one to two working days.
What the job includes
- Supply of the new bath, taps or filler, waste and overflow, and bath panel
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
- Leak testing at the waste, overflow and taps, taking the old bath away and a final clean
Decisions to make first
Shower bath
A P-shaped or L-shaped bath is wider at the shower end, giving room to stand and space for a fixed screen instead of a curtain.
Taps or filler
Deck taps on the rim are the simplest swap. Wall-mounted taps or a bath filler look cleaner but mean opening the wall, and an overflow filler hides the spout altogether.
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Rules that apply in England
Replacing a bath in an existing bathroom does not need planning permission, and a straight swap is not normally building regulations work. New taps or a filler must meet the water fittings rules where you live, including backflow protection. If the new bath is much heavier than the old one, such as a cast-iron or stone resin freestanding bath, the floor needs checking, and strengthening joists is structural work that may need building control approval.
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.