What does a bath to shower conversion cost in County Fermanagh?
Our guide range in County Fermanagh is £1,750–£4,400 including VAT. Prices in County Fermanagh run at about 12% below the UK guide, based on Northern Ireland labour rates.
Tray and enclosure
- Bath removed, tray in its place
Walk-in shower
- Concealed valve, rainfall head
Level-access floor
- Grab rails and seat options
Guide prices for County Fermanagh including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in County Fermanagh?
Water across much of County Fermanagh is soft. If that holds for your street in Enniskillen, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Enniskillen bathroom was refitted recently and you like the rest of it, we can convert just the bath area and finish the new tiling neatly against the old.
What the job includes
- Repair or replacement of floorboards where the bath has left them soft or damaged
- A glass enclosure, walk-in panel or frameless screen
- Boarding, tanking and re-tiling of the shower walls
- A thermostatic shower valve, with the pipework moved for the new head position
- A survey of the bath space, the waste position, the floor and your water system
- Silicone, a full-flow test and a tidy finish where the new tiling meets the old
Decisions to make first
Safety extras
A fold-down seat, grab rails and a slip-resistant tray cost little at the time of fitting and are much harder to add later.
How much to re-tile
Re-tile just the shower walls, or take the chance to re-tile the whole room so new and old tiles never have to match.
Enclosure or walk-in
An enclosure with a door keeps all the water in and suits a shorter space. A walk-in panel makes the most of the full 1700 mm length an old bath leaves.
Mixer or electric shower
A thermostatic mixer draws on your hot-water system. An electric shower heats cold mains water as it flows and needs its own circuit.
Rules that apply in Northern Ireland
Converting a bath to a shower does not need planning permission. The shower area is a special location under BS 7671, with 30 mA RCD protection on every circuit and at least IPX4 fittings in zone 1 above the tray up to 2.25 m. A shower pump can only be used on a gravity system with a cold tank, never on the mains. Where the conversion adapts the home for a disabled person, the work can be zero-rated for VAT under HMRC VAT Notice 701/7.
In Northern Ireland, building control is only involved if drainage, structure or ventilation change. Disabled Facilities Grants of up to £25,000 are available through the Housing Executive, and wiring should follow BS 7671.