- Postcode districts
- HU17
- Nearby
- Kingston upon Hull, Brough and Bridlington
- Guide price
- £1,850–£4,600
- Typical time on site
- 2–6 working days
- Water
- Hard across most of the East Riding of Yorkshire
- Survey
- Free, at your home
What does a bath to shower conversion cost in Beverley?
For Beverley, our guide range for a bath to shower conversion is £1,850 to £4,600 including VAT. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Tray and enclosure
- Bath removed, tray in its place
Walk-in shower
- Concealed valve, rainfall head
Level-access floor
- Grab rails and seat options
Guide prices for Beverley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Beverley
We work right across Beverley — HU17 — and in neighbouring Kingston upon Hull and Brough.
Homes in and around Beverley vary, so we look at the floor, the walls and the water system before we price anything. If the bath in your Beverley home is mainly used for storing things, a walk-in shower in the same space is a quick, contained job. If someone in your Beverley home is finding the bath side harder to step over, a low or level-access tray removes the problem.
Supplies across most of the East Riding of Yorkshire are hard. If your supply in Beverley is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Silicone, a full-flow test and a tidy finish where the new tiling meets the old
- A glass enclosure, walk-in panel or frameless screen
- A low-profile tray, or a former and tanking for a level-access floor
- Boarding, tanking and re-tiling of the shower walls
Decisions to make first
Mixer or electric shower
A thermostatic mixer draws on your hot-water system. An electric shower heats cold mains water as it flows and needs its own circuit.
Enclosure or walk-in
An enclosure with a door keeps all the water in and suits a shorter space. A walk-in panel makes the most of the full 1700 mm length an old bath leaves.
Rules that apply in England
In England, adding an electric shower usually means a new circuit, which is notifiable under Part P, as is any change to the wiring in the bathroom. Where the conversion is an adaptation for a disabled person, a Disabled Facilities Grant of up to £30,000 may help, but the council must approve it before work starts.
