What does a bath to shower conversion cost in Gloucestershire?
Our guide range in Gloucestershire is £2,000–£5,100 including VAT.
Tray and enclosure
- Glass enclosure or walk-in panel
Walk-in shower
- Full-height tiling
Level-access floor
- Floor former and tanking
Guide prices for Gloucestershire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Gloucestershire?
Supplies across most of Gloucestershire are hard. If your supply in Gloucester is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Gloucester bathroom was refitted recently and you like the rest of it, we can convert just the bath area and finish the new tiling neatly against the old.
What the job includes
- Grab rails and a fold-down seat if you want them
- Boarding, tanking and re-tiling of the shower walls
- A survey of the bath space, the waste position, the floor and your water system
- A low-profile tray, or a former and tanking for a level-access floor
- Repair or replacement of floorboards where the bath has left them soft or damaged
- A thermostatic shower valve, with the pipework moved for the new head position
Decisions to make first
Enclosure or walk-in
An enclosure with a door keeps all the water in and suits a shorter space. A walk-in panel makes the most of the full 1700 mm length an old bath leaves.
How much to re-tile
Re-tile just the shower walls, or take the chance to re-tile the whole room so new and old tiles never have to match.
Low tray or level floor
A low-profile tray has a small lip. A level-access floor removes the step altogether but needs a former, tanking and a linear drain.
Your only bath?
If this is the only bath in the house, think about whether you, or a future buyer, will want one before you commit.
Rules that apply in England
Converting a bath to a shower does not need planning permission. The shower area is a special location under BS 7671, with 30 mA RCD protection on every circuit and at least IPX4 fittings in zone 1 above the tray up to 2.25 m. A shower pump can only be used on a gravity system with a cold tank, never on the mains. Where the conversion adapts the home for a disabled person, the work can be zero-rated for VAT under HMRC VAT Notice 701/7.
In England, adding an electric shower usually means a new circuit, which is notifiable under Part P, as is any change to the wiring in the bathroom. Where the conversion is an adaptation for a disabled person, a Disabled Facilities Grant of up to £30,000 may help, but the council must approve it before work starts.