What does a bath to shower conversion cost in Hertfordshire?
Our guide range in Hertfordshire is £2,100–£5,300 including VAT. Prices in Hertfordshire run at about 6% above the UK guide, based on East of England labour rates.
Tray and enclosure
- Glass enclosure or walk-in panel
Walk-in shower
- Full-height tiling
Level-access floor
- Floor former and tanking
Guide prices for Hertfordshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Hertfordshire?
- Watford
- Hemel Hempstead
- Stevenage
- St Albans
- Welwyn Garden City
- Cheshunt
- Hatfield
- Bishops Stortford
- Borehamwood
- Hitchin
- Hoddesdon
- Letchworth Garden City
- North Watford
- Harpenden
- Bushey
- Hertford
- Rickmansworth
- Potters Bar
- Berkhamsted
- Ware
Water across much of Hertfordshire is very hard. If your supply in Watford is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. For Watford houses with only one bath, we talk through whether to keep it before you decide.
What the job includes
- Grab rails and a fold-down seat if you want them
- A survey of the bath space, the waste position, the floor and your water system
- Removal of the bath, panel and taps, and disposal of the waste
- Repair or replacement of floorboards where the bath has left them soft or damaged
- A glass enclosure, walk-in panel or frameless screen
- A low-profile tray, or a former and tanking for a level-access floor
Decisions to make first
Safety extras
A fold-down seat, grab rails and a slip-resistant tray cost little at the time of fitting and are much harder to add later.
Mixer or electric shower
A thermostatic mixer draws on your hot-water system. An electric shower heats cold mains water as it flows and needs its own circuit.
How much to re-tile
Re-tile just the shower walls, or take the chance to re-tile the whole room so new and old tiles never have to match.
Low tray or level floor
A low-profile tray has a small lip. A level-access floor removes the step altogether but needs a former, tanking and a linear drain.
Rules that apply in England
Converting a bath to a shower does not need planning permission. The shower area is a special location under BS 7671, with 30 mA RCD protection on every circuit and at least IPX4 fittings in zone 1 above the tray up to 2.25 m. A shower pump can only be used on a gravity system with a cold tank, never on the mains. Where the conversion adapts the home for a disabled person, the work can be zero-rated for VAT under HMRC VAT Notice 701/7.
In England, adding an electric shower usually means a new circuit, which is notifiable under Part P, as is any change to the wiring in the bathroom. Where the conversion is an adaptation for a disabled person, a Disabled Facilities Grant of up to £30,000 may help, but the council must approve it before work starts.