What does a bath to shower conversion cost in Mid Glamorgan?
Our guide range in Mid Glamorgan is £1,850–£4,600 including VAT. Prices in Mid Glamorgan run at about 7% below the UK guide, based on Wales labour rates.
Tray and enclosure
- Bath removed, tray in its place
Walk-in shower
- Concealed valve, rainfall head
Level-access floor
- Grab rails and seat options
Guide prices for Mid Glamorgan including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Mid Glamorgan?
Most of Mid Glamorgan is supplied with soft water. If that holds for your street in Rhondda, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. We check the floor under the bath during a Rhondda survey where we can, because old leaks can leave soft boards.
What the job includes
- A low-profile tray, or a former and tanking for a level-access floor
- Boarding, tanking and re-tiling of the shower walls
- Repair or replacement of floorboards where the bath has left them soft or damaged
- Removal of the bath, panel and taps, and disposal of the waste
- A thermostatic shower valve, with the pipework moved for the new head position
- A glass enclosure, walk-in panel or frameless screen
Decisions to make first
Enclosure or walk-in
An enclosure with a door keeps all the water in and suits a shorter space. A walk-in panel makes the most of the full 1700 mm length an old bath leaves.
How much to re-tile
Re-tile just the shower walls, or take the chance to re-tile the whole room so new and old tiles never have to match.
Safety extras
A fold-down seat, grab rails and a slip-resistant tray cost little at the time of fitting and are much harder to add later.
Mixer or electric shower
A thermostatic mixer draws on your hot-water system. An electric shower heats cold mains water as it flows and needs its own circuit.
Rules that apply in Wales
Converting a bath to a shower does not need planning permission. The shower area is a special location under BS 7671, with 30 mA RCD protection on every circuit and at least IPX4 fittings in zone 1 above the tray up to 2.25 m. A shower pump can only be used on a gravity system with a cold tank, never on the mains. Where the conversion adapts the home for a disabled person, the work can be zero-rated for VAT under HMRC VAT Notice 701/7.
In Wales, the Welsh Part P covers more electrical work than in England, and a new electric shower circuit must be notified. Disabled Facilities Grants in Wales can be up to £36,000, approved by the council before work begins.