What does a new bathroom design cost in Rutland?
Design has no separate fee on a supply-and-fit job. A complete fitted bathroom in Rutland typically costs £6,200–£11,500 including VAT. Prices in Rutland run at about 4% below the UK guide, based on East Midlands labour rates.
Survey and layout
- Measured survey at home
Detailed design
- Product schedule
Full project
- Typical supply-and-fit total
Guide prices for Rutland including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Rutland?
Supplies across most of Rutland are hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Oakham bathroom has a soil stack in an awkward corner, the design starts there, because it is the one point that is costly to move.
What the job includes
- A measured survey of the room, including ceiling heights, slopes, window and door positions and any boxing
- A clear view of which changes are cheap and which mean moving drainage or opening floors
- A conversation about who uses the room, when, and what does not work about the current one
- Elevations and tile layouts on a design, supply and fit project, so the setting-out is agreed before tiling starts
- Checks on the soil stack, waste routes, joist direction, water pressure, hot water system and existing electrics
- A written, itemised quote, with the price fixed in writing once the layout and products are agreed
Decisions to make first
The door
Re-hanging the door on the other side, fitting a sliding pocket door or moving the opening can free up a whole wall in a small room.
Planning for later
Timber noggins in the walls for future grab rails, a wider door or a level shower floor cost far less to build in now than to add later.
Where the shower goes
A shower on an outside wall is easier to ventilate; one under a sloping ceiling needs full head height where you stand, not just at the high side.
Tile setting-out
Centring tiles on the window, basin or niche avoids thin slivers at the edges. Large tiles mean fewer joints but need flatter walls.
Rules that apply in England
Changing the layout inside an existing bathroom does not need planning permission. The design does have to respect the electrical zones around the bath and shower under BS 7671, the water fittings rules for new WCs and taps, including a maximum 6-litre flush, and adequate extract ventilation. Listed buildings need listed building consent for alterations affecting their character, including new soil or vent pipes through walls, and in a flat the lease often requires freeholder consent for moving the WC or adding a new vent.
In England, a new connection to the soil stack or new drainage can be building regulations work under Part H, and new circuits or alterations to circuits in the bathroom are notifiable under Part P. Where a new bathroom is formed, Approved Document F asks for extract at 15 l/s intermittent or 8 l/s continuous.