Bathroom lighting in Bedfordshire

What does new bathroom lighting cost in Bedfordshire?

Our guide range in Bedfordshire is £350–£1,250 including VAT. Prices in Bedfordshire run at about 6% above the UK guide, based on East of England labour rates.

Typical

Essential

£300–£650

Testing and certificate

Layered

£650–£1,250

Downlights plus mirror or vanity light

Feature

£1,050–£2,100

Illuminated mirror cabinet

Guide prices for Bedfordshire including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Bedfordshire?

Supplies across most of Bedfordshire are very hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. Landlords in Luton get an electrical certificate for new bathroom lighting, which belongs with the property's safety records.

What the job includes

A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
Cable runs to each fitting, from the loft above or through the ceiling
RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
A shaver supply unit where wanted, positioned away from direct spray

Decisions to make first

Switching

A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.

Colour temperature

Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.

Feature lighting

LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.

Downlight positions

Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.

Rules that apply in England

BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.

In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

Bathroom lighting in Bedfordshire: questions

How much does new bathroom lighting cost in Bedfordshire?

New bathroom lighting in Bedfordshire typically costs £350–£1,250 including VAT, based on East of England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Bedfordshire do you cover?

We cover the whole of Bedfordshire, including Luton, Bedford, Dunstable, Leighton Buzzard, Ampthill, Kempston and Biggleswade. If your town is not listed, we still cover it — get in touch with your postcode.

How long does new bathroom lighting take?

Most jobs take half a day to 2 days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Bedfordshire?

Where should the light switch go in a bathroom?

Usually outside the door, or inside as a ceiling pull-cord. Ordinary wall switches are kept out of the bathroom zones, and a pull-cord keeps the switch itself out of reach of wet hands.