- Postcode districts
- TQ2, TQ3, TQ4
- Nearby
- Torquay, Brixham and Newton Abbot
- Guide price
- £350–£1,200
- Typical time on site
- half a day to 2 days
- Water
- Soft across most of Devon
- Survey
- Free, at your home
What does new bathroom lighting cost in Paignton?
In Paignton, new bathroom lighting typically costs £350–£1,200 including VAT, based on South West England prices. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Paignton including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Paignton
As well as Paignton itself (TQ2, TQ3 and TQ4), we survey in Torquay, Brixham and Newton Abbot.
In Paignton, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. Bathroom lighting in Paignton is wired to BS 7671 with RCD protection, tested, and certified when it is finished. If you are refitting a windowless bathroom in Paignton, the lighting is planned with the extractor fan so the two work together.
Supplies across most of Devon are soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Cable runs to each fitting, from the loft above or through the ceiling
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
Decisions to make first
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Integrated or replaceable LED
Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

