- Postcode districts
- HU14, HU15
- Nearby
- Kingston upon Hull, Beverley and Scunthorpe
- Guide price
- £350–£1,100
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of the East Riding of Yorkshire
- Survey
- Free, at your home
What does new bathroom lighting cost in Brough?
Guide price in Brough: £350–£1,100 including VAT, depending on the room and what you choose. Labour costs in Yorkshire and the Humber put local prices at about 7% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for Brough including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Brough
We cover every part of Brough, including HU14 and HU15, and nearby Kingston upon Hull (9.7 miles) and Beverley (10.1 miles).
Being a smaller town does not change how we work in Brough: free survey, written quote, one team. Bathroom lighting in Brough is wired to BS 7671 with RCD protection, tested, and certified when it is finished. We survey Brough bathrooms before quoting lighting, so the zones are measured from your actual bath and shower.
Supplies across most of the East Riding of Yorkshire are hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- A shaver supply unit where wanted, positioned away from direct spray
- Cable runs to each fitting, from the loft above or through the ceiling
Decisions to make first
Mirror lighting
An illuminated mirror or mirror cabinet lights the face from the front, which a ceiling light cannot do. Many include a demister pad and a shaver socket.
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

