- Postcode districts
- DA11, DA12
- Nearby
- Swanscombe, Grays and Longfield
- Guide price
- £400–£1,350
- Typical time on site
- half a day to 2 days
- Water
- Very hard across most of Kent
- Survey
- Free, at your home
What does new bathroom lighting cost in Gravesend?
In Gravesend, new bathroom lighting typically costs £400–£1,350 including VAT, based on South East England prices. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for Gravesend including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Gravesend
As well as Gravesend itself (DA11 and DA12), we survey in Swanscombe, Grays and Longfield.
Homes in and around Gravesend vary, so we look at the floor, the walls and the water system before we price anything. Landlords in Gravesend get an electrical certificate for new bathroom lighting, which belongs with the property's safety records. If your Gravesend bathroom has one central light, adding downlights and a mirror light is usually the change you notice most.
Supplies across most of Kent are very hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Cable runs to each fitting, from the loft above or through the ceiling
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- A shaver supply unit where wanted, positioned away from direct spray
Decisions to make first
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

