- Postcode districts
- TN9, TN10, TN11
- Nearby
- Tunbridge Wells, Sevenoaks and Crowborough
- Guide price
- £400–£1,350
- Typical time on site
- half a day to 2 days
- Water
- Very hard across most of Kent
- Survey
- Free, at your home
What does new bathroom lighting cost in Tonbridge?
As a guide, budget £400 to £1,350 including VAT for new bathroom lighting in Tonbridge; your written quote will pin it down. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Testing and certificate
Layered
- Downlights plus mirror or vanity light
Feature
- Illuminated mirror cabinet
Guide prices for Tonbridge including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Tonbridge
We work right across Tonbridge — TN9, TN10 and TN11 — and in neighbouring Tunbridge Wells and Sevenoaks.
Homes in and around Tonbridge vary, so we look at the floor, the walls and the water system before we price anything. We survey Tonbridge bathrooms before quoting lighting, so the zones are measured from your actual bath and shower. For Tonbridge homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in.
Supplies across most of Kent are very hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Cable runs to each fitting, from the loft above or through the ceiling
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
Decisions to make first
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.
