- Postcode districts
- BB10, BB11
- Nearby
- Nelson, Colne and Accrington
- Guide price
- £350–£1,150
- Typical time on site
- half a day to 2 days
- Water
- Soft across most of Lancashire
- Survey
- Free, at your home
What does new bathroom lighting cost in Burnley?
Our guide price for new bathroom lighting in Burnley is £350–£1,150 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for Burnley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Burnley
In Burnley we cover BB10 and BB11; we also cover Nelson, 2.7 miles away, and Colne.
Burnley has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. For Burnley homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in. Bathroom lighting in Burnley is wired to BS 7671 with RCD protection, tested, and certified when it is finished.
Supplies across most of Lancashire are soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- Cable runs to each fitting, from the loft above or through the ceiling
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
Decisions to make first
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

