- Postcode districts
- TS6, TS10
- Nearby
- Guisborough, Middlesbrough and Hartlepool
- Guide price
- £350–£1,100
- Typical time on site
- half a day to 2 days
- Water
- Moderately hard across most of North Yorkshire
- Survey
- Free, at your home
What does new bathroom lighting cost in Redcar?
Guide price in Redcar: £350–£1,100 including VAT, depending on the room and what you choose. Prices in Yorkshire and the Humber run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Redcar including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Redcar
As well as Redcar itself (TS6 and TS10), we survey in Guisborough, Middlesbrough and Hartlepool.
Homes in and around Redcar vary, so we look at the floor, the walls and the water system before we price anything. For Redcar homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in. If your Redcar bathroom has one central light, adding downlights and a mirror light is usually the change you notice most.
Most of North Yorkshire has moderately hard water. Easy-clean glass and good-quality brassware are money well spent. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- Cable runs to each fitting, from the loft above or through the ceiling
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
Decisions to make first
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

