- Postcode districts
- YO8
- Nearby
- Goole, Pontefract and York
- Guide price
- £350–£1,100
- Typical time on site
- half a day to 2 days
- Water
- Moderately hard across most of North Yorkshire
- Survey
- Free, at your home
What does new bathroom lighting cost in Selby?
As a guide, budget £350 to £1,100 including VAT for new bathroom lighting in Selby; your written quote will pin it down. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Selby including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Selby
We work right across Selby — YO8 — and in neighbouring Goole and Pontefract.
Being a smaller town does not change how we work in Selby: free survey, written quote, one team. We survey Selby bathrooms before quoting lighting, so the zones are measured from your actual bath and shower. If your Selby bathroom has one central light, adding downlights and a mirror light is usually the change you notice most.
Supplies across most of North Yorkshire are moderately hard. Easy-clean glass and good-quality brassware are money well spent. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- A shaver supply unit where wanted, positioned away from direct spray
Decisions to make first
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

