- Postcode districts
- GU26, GU27
- Nearby
- Bordon, Godalming and Farnham
- Guide price
- £400–£1,350
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of Surrey
- Survey
- Free, at your home
What does new bathroom lighting cost in Haslemere?
For Haslemere, our guide range for new bathroom lighting is £400 to £1,350 including VAT. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for Haslemere including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Haslemere
We cover every part of Haslemere, including GU26 and GU27, and nearby Bordon (6.9 miles) and Godalming (7.7 miles).
Haslemere gets the same process as anywhere else: a free survey at your home and a written, itemised quote. We survey Haslemere bathrooms before quoting lighting, so the zones are measured from your actual bath and shower. If your Haslemere bathroom has one central light, adding downlights and a mirror light is usually the change you notice most.
Water across much of Surrey is hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- A shaver supply unit where wanted, positioned away from direct spray
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
Decisions to make first
Mirror lighting
An illuminated mirror or mirror cabinet lights the face from the front, which a ceiling light cannot do. Many include a demister pad and a shaver socket.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

