- Postcode districts
- NE8, NE9, NE10
- Nearby
- Gateshead, Newcastle upon Tyne and Hebburn
- Guide price
- £300–£1,100
- Typical time on site
- half a day to 2 days
- Water
- Soft across most of Tyne and Wear
- Survey
- Free, at your home
What does new bathroom lighting cost in Felling?
As a guide, budget £300 to £1,100 including VAT for new bathroom lighting in Felling; your written quote will pin it down. Labour costs in North East England put local prices at about 10% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Felling including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Felling
As well as Felling itself (NE8, NE9 and NE10), we survey in Gateshead, Newcastle upon Tyne and Hebburn.
Homes in and around Felling vary, so we look at the floor, the walls and the water system before we price anything. If your Felling bathroom has one central light, adding downlights and a mirror light is usually the change you notice most. Bathroom lighting in Felling is wired to BS 7671 with RCD protection, tested, and certified when it is finished.
Water across much of Tyne and Wear is soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A shaver supply unit where wanted, positioned away from direct spray
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- Testing and an electrical certificate for the work on completion
Decisions to make first
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

