- Postcode districts
- CV12
- Nearby
- Nuneaton, Coventry and Hinckley
- Guide price
- £350–£1,200
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of Warwickshire
- Survey
- Free, at your home
What does new bathroom lighting cost in Bedworth?
As a guide, budget £350 to £1,200 including VAT for new bathroom lighting in Bedworth; your written quote will pin it down. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Testing and certificate
Layered
- Downlights plus mirror or vanity light
Feature
- Illuminated mirror cabinet
Guide prices for Bedworth including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Bedworth
As well as Bedworth itself (CV12), we survey in Nuneaton, Coventry and Hinckley.
In Bedworth, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. For Bedworth homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in. Bathroom lighting in Bedworth is wired to BS 7671 with RCD protection, tested, and certified when it is finished.
Supplies across most of Warwickshire are hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- Cable runs to each fitting, from the loft above or through the ceiling
Decisions to make first
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

