- Postcode districts
- AB10, AB11, AB12, AB15, AB16, AB23 + 2 more
- Nearby
- Inverurie, Peterhead and Fraserburgh
- Guide price
- £600–£3,800
- Typical time on site
- 1–5 working days
- Water
- Soft across most of Aberdeen and Aberdeenshire
- Survey
- Free, at your home
What does bathroom plumbing work cost in Aberdeen?
For Aberdeen, our guide range for bathroom plumbing work is £600 to £3,800 including VAT. Labour costs in Scotland put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like
- Isolation valves, new tails
Partial re-route
- Waste re-routed
New layout
- WC moved on the soil stack
Guide prices for Aberdeen including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Aberdeen
In Aberdeen we cover AB10, AB11, AB12 and 5 more postcode districts; we also cover Inverurie, 14.3 miles away, and Peterhead.
In a city the size of Aberdeen, parking and access for a skip are worth sorting before the start date — we will ask at the survey. For Aberdeen homes on a combi boiler, we measure the flow rate at the bathroom before you choose a shower valve. In Aberdeen flats, any change to the WC or wastes is planned with the title deeds and the flat below in mind.
Most of Aberdeen and Aberdeenshire is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Basin, bath and shower wastes sized and laid to a steady fall, with traps that hold their water seal
- A check of your hot water system, and the pressure and flow rate at the bathroom
- Draining down and isolating supplies, with the rest of the house back on water as soon as possible
- The WC connected to the soil stack, or a new branch where the WC is moving
Decisions to make first
Shower supply
Combi boilers and unvented cylinders give mains pressure. A gravity system with a cold tank may need a pump, but a pump must never be connected to the mains.
Pipe routes
Drilling through the middle of joists, rather than notching the tops, keeps the floor strong. Routes are planned with the joist direction in mind.
Rules that apply in Scotland
In Scotland, the Scottish Water Byelaws 2014 cover new water fittings, with the same 6-litre flush limit and backflow rules. Altering drainage may need a building warrant, so check before moving a WC or adding a new connection to the stack.

