What does bathroom plumbing work cost in Bedfordshire?
Our guide range in Bedfordshire is £650–£4,200 including VAT. Prices in Bedfordshire run at about 6% above the UK guide, based on East of England labour rates.
Like-for-like
- Pressure test
Partial re-route
- Basin or shower moved
New layout
- Pumped waste or macerator
Guide prices for Bedfordshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Bedfordshire?
Most of Bedfordshire has very hard water. Taps, plug wastes and toilet pans scale up quickly, so chrome copes better than matt black, and a removable aerator is worth having. Hardness varies street by street, so check the figure for your postcode with your water supplier. For Luton homes on a combi boiler, we measure the flow rate at the bathroom before you choose a shower valve.
What the job includes
- New hot and cold pipework in copper or plastic, properly clipped, and insulated where it runs through cold spaces
- Draining down and isolating supplies, with the rest of the house back on water as soon as possible
- A check of your hot water system, and the pressure and flow rate at the bathroom
- Isolation valves on every fitting, so taps, cisterns and valves can be serviced without draining the system
- Shower pumps on gravity systems, and macerators or pumped wastes where gravity drainage cannot reach
- Basin, bath and shower wastes sized and laid to a steady fall, with traps that hold their water seal
Decisions to make first
Pipe routes
Drilling through the middle of joists, rather than notching the tops, keeps the floor strong. Routes are planned with the joist direction in mind.
Copper or plastic
Copper is rigid and suits pipes on show or near the boiler. Plastic is quicker under floors and inside walls, and long runs need fewer joints.
Gravity or pumped waste
Gravity drainage is always the first choice. A shower waste pump or macerator solves a run that cannot fall, but adds noise, a power supply and servicing.
Hard water
In hard water areas, a scale reducer or water softener protects valves, shower heads and glass. Keep an unsoftened tap in the kitchen for drinking.
Rules that apply in England
New WCs, taps, showers and valves must meet the water fittings rules where you live: a maximum 6-litre flush for new WCs, backflow protection, and no pump connected directly to the mains supply, because shower pumps are only for gravity systems with a cold tank. Unvented hot-water cylinders must be installed by a G3-qualified installer, and any work on a gas boiler by a Gas Safe registered engineer.
In England, the Water Supply (Water Fittings) Regulations 1999 apply. New drainage or a new connection to the soil stack can be building regulations work under Part H, and a macerator or pumped WC is acceptable only where there is also a WC on gravity drainage elsewhere in the home.