- Postcode districts
- CF47, CF48
- Nearby
- Aberdare, Rhondda and Ebbw Vale
- Guide price
- £550–£3,700
- Typical time on site
- 1–5 working days
- Water
- Soft across most of Mid Glamorgan
- Survey
- Free, at your home
What does bathroom plumbing work cost in Merthyr Tydfil?
Guide price in Merthyr Tydfil: £550–£3,700 including VAT, depending on the room and what you choose. Prices in Wales run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like
- New suite in the same positions
Partial re-route
- New hot and cold runs
New layout
- Pump or pressure upgrade
Guide prices for Merthyr Tydfil including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Merthyr Tydfil
As well as Merthyr Tydfil itself (CF47 and CF48), we survey in Aberdare, Rhondda and Ebbw Vale.
In Merthyr Tydfil, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Merthyr Tydfil water is hard, a scale reducer or softener on the bathroom supplies can protect valves and shower heads. If your Merthyr Tydfil bathroom layout is changing, the soil stack position is checked first, because it decides where the WC can go.
Water across much of Mid Glamorgan is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Basin, bath and shower wastes sized and laid to a steady fall, with traps that hold their water seal
- A check of your hot water system, and the pressure and flow rate at the bathroom
- Shower pumps on gravity systems, and macerators or pumped wastes where gravity drainage cannot reach
- A pressure test of new pipework before walls are closed in and floors go down
Decisions to make first
Shower supply
Combi boilers and unvented cylinders give mains pressure. A gravity system with a cold tank may need a pump, but a pump must never be connected to the mains.
Copper or plastic
Copper is rigid and suits pipes on show or near the boiler. Plastic is quicker under floors and inside walls, and long runs need fewer joints.
Rules that apply in Wales
Wales also uses the Water Supply (Water Fittings) Regulations 1999 and has its own Part H for drainage. The same rule on macerators applies: there must be a gravity-drained WC elsewhere in the home.
