Bathroom tiling in Swanscombe

Postcode districts: DA10
Nearby: Grays, Gravesend and Longfield
Guide price: £50–£100 per m²
Typical time on site: 2–4 working days
Water: Very hard across most of Kent
Survey: Free, at your home

What does bathroom tiling cost in Swanscombe?

Our guide price for bathroom tiling in Swanscombe is £50–£100 per m² including VAT. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Ceramic

£50–£75 per m²

Standard ceramic wall tiles

Typical

Porcelain

£65–£100 per m²

Full height in wet zones

Large-format or stone

£95–£145 per m²

Sealing where needed

Guide prices for Swanscombe including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Swanscombe

We work right across Swanscombe — DA10 — and in neighbouring Grays and Gravesend.

Swanscombe gets the same process as anywhere else: a free survey at your home and a written, itemised quote. We measure tiled areas in Swanscombe bathrooms on site, so the quote is based on real square metres. If your Swanscombe home has hard water, larger tiles and epoxy grout leave fewer joints for limescale to build up in.

Most of Kent has very hard water. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Fixing with an adhesive suited to the tile and the surface, with levelling clips for large tiles
Measuring wall and floor areas and working out quantities with an allowance for cuts
Setting out so cuts are even and joints line up with niches, windows and edges
Grouting, trims or mitred edges, and silicone at internal corners, the bath and the tray

Decisions to make first

Edges

Metal or PVC trims are quick and protect tile edges. Mitred edges look cleaner on porcelain and take more labour.

Ceramic or porcelain

Ceramic is lighter, easier to cut and cheaper, and is fine on walls. Porcelain is denser and absorbs less water, so it suits floors and showers.

Rules that apply in England

In England, tiling itself is not building regulations work. If it is part of forming a level shower floor with new drainage, that drainage can be Part H work, and any new electrics are covered by Part P.

More about bathroom tiling

Bathroom tiling in Swanscombe: questions

How much should I budget for bathroom tiling in Swanscombe?

Bathroom tiling in Swanscombe usually costs £50–£100 per m² including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Do you cover DA10 in Swanscombe?

Yes. We cover all of Swanscombe, including DA10, and nearby Grays, Gravesend and Longfield. Survey visits are free and arranged at a time that suits you.

Is the water hard in Swanscombe?

Who handles building control for bathroom tiling in Swanscombe?

Building control for Swanscombe is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Do I need to tank a bathroom before tiling?

The shower area should always be tanked, because tiles and grout are not waterproof on their own. Around a bath with a shower over it, tanking the walls to above the shower head is sensible. A wet room needs the whole floor and the lower walls tanked.