What does a bathroom extractor fan cost in Greater London?
Our guide range in Greater London is £300–£750 including VAT. Prices in Greater London run at about 25% above the UK guide, based on London labour rates.
Extractor fan
- Ducted to outside
Inline fan
- Grille in the ceiling
Continuous extract
- Low-energy fan running all the time
Guide prices for Greater London including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Greater London?
- Brent
- Islington
- Bexley
- Barking
- Archway
- Sutton
- Croydon
- Ilford
- Enfield
- Harrow
- Tottenham
- Walthamstow
- Dagenham
- Becontree
- Romford
- Hayes
- Wembley
- Fulham
- Edmonton
- Southall
- Putney
- Battersea
- Canary Wharf
- Purley
- Peckham
- Chingford
- Uxbridge
- Wimbledon
- Stamford Hill
- Brixton
- Hounslow
- Finchley
- Cricklewood
- Mitcham
- Feltham
- Acton
- Beckenham
- Chelsea
- Streatham
- South Croydon
- Leytonstone
- Eltham
- Morden
- Carshalton
- Catford
- Willesden
- Canning Town
- Holloway
- Welling
- Shepherds Bush
- Surbiton
- Greenford
- Heston
- Stratford
- Chiswick
- Thamesmead
- Ruislip
- Greenwich
- Barnet
- Kilburn
- Wood Green
- Muswell Hill
- Bow
- Highbury
- Camden Town
- Northolt
- Coulsdon
- Hornchurch
- Blackheath
- Isleworth
Water across much of Greater London is very hard. Steam carries that scale onto mirrors and glass, so a fan that clears the room quickly helps on both counts. Hardness varies street by street, so check the figure for your postcode with your water supplier. We check the duct route at Brent surveys, because a short, straight run to outside matters more than the fan's headline figure.
What the job includes
- A check of the room, any existing fan or vent, and the shortest route to the outside
- Core-drilling through the wall, or ducting through the loft to a roof or soffit vent
- A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
- Rigid or semi-rigid ducting kept short and straight, and insulated where it crosses a cold loft
- A backdraught shutter and external grille, so cold air does not blow back in
- Making good around the fan and checking that it extracts properly at the grille
Decisions to make first
Wall or ceiling
A wall fan on an outside wall is the simplest. A ceiling fan over the shower takes steam away at source but needs ducting through the loft.
Noise
Compare the stated noise level in decibels. Inline fans and low-speed continuous fans are much quieter in the room than budget axial fans.
Intermittent or continuous
An intermittent fan runs during and after use. A continuous fan runs quietly all the time at a low rate and boosts when humidity rises.
Timer or humidistat
A timer keeps the fan running after the light goes off. A humidistat starts it whenever moisture rises, which suits rooms where people forget.
Rules that apply in England
A bathroom needs extract ventilation when it is newly formed, and on a refit an existing fan should not be replaced with a less effective one. The fan and its wiring must meet BS 7671 for the zone it sits in, on a circuit with 30 mA RCD protection. In a flat, the lease often requires freeholder consent for a new extract vent, and in a listed building a new opening through an external wall can need listed building consent.
In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.