What does a bathroom extractor fan cost in Staffordshire?
Our guide range in Staffordshire is £245–£600 including VAT.
Extractor fan
- Ducted to outside
Inline fan
- Grille in the ceiling
Continuous extract
- Low-energy fan running all the time
Guide prices for Staffordshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Staffordshire?
- Stoke-on-Trent
- Newcastle under Lyme
- Burton upon Trent
- Cannock
- Tamworth
- Stafford
- Lichfield
- Kidsgrove
- Burntwood
- Longton
- Rugeley
- Leek
- Great Wyrley
- Biddulph
Water across much of Staffordshire is moderately hard. Scale is a minor issue next to condensation, which is what a properly sized extractor fan is for. Hardness varies street by street, so check the figure for your postcode with your water supplier. For windowless bathrooms in Stoke-on-Trent homes, continuous extract that boosts on humidity often works better than a fan tied to the light switch.
What the job includes
- Run-on timer, humidistat or light-linked switching set up to suit how the room is used
- A backdraught shutter and external grille, so cold air does not blow back in
- A check of the room, any existing fan or vent, and the shortest route to the outside
- A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
- Wiring by a qualified electrician, with an isolator outside the room and RCD protection
- Making good around the fan and checking that it extracts properly at the grille
Decisions to make first
Replacement air
A fan needs air to replace what it removes, so leave a gap of around 10 mm under the door or fit a door grille. A sealed room starves the fan.
Axial, centrifugal or inline
Axial fans suit short, straight runs; centrifugal fans cope better with longer ducts; inline fans sit in the loft and are the quietest in the room.
Wall or ceiling
A wall fan on an outside wall is the simplest. A ceiling fan over the shower takes steam away at source but needs ducting through the loft.
Noise
Compare the stated noise level in decibels. Inline fans and low-speed continuous fans are much quieter in the room than budget axial fans.
Rules that apply in England
A bathroom needs extract ventilation when it is newly formed, and on a refit an existing fan should not be replaced with a less effective one. The fan and its wiring must meet BS 7671 for the zone it sits in, on a circuit with 30 mA RCD protection. In a flat, the lease often requires freeholder consent for a new extract vent, and in a listed building a new opening through an external wall can need listed building consent.
In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.