- Postcode districts
- LS19, LS20
- Nearby
- Yeadon, Baildon and Shipley
- Guide price
- £230–£550
- Typical time on site
- half a day
- Water
- Soft across most of West Yorkshire
- Survey
- Free, at your home
What does a bathroom extractor fan cost in Guiseley?
In Guiseley, a bathroom extractor fan typically costs £230–£550 including VAT, based on Yorkshire and the Humber prices. Labour costs in Yorkshire and the Humber put local prices at about 7% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Extractor fan
- Ducted to outside
Inline fan
- Grille in the ceiling
Continuous extract
- Low-energy fan running all the time
Guide prices for Guiseley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Guiseley
In Guiseley we cover LS19 and LS20; we also cover Yeadon, 1.3 miles away, and Baildon.
Guiseley gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Guiseley bathroom has black mould on the ceiling or silicone, the fan and its duct are the first things we check. For windowless bathrooms in Guiseley homes, continuous extract that boosts on humidity often works better than a fan tied to the light switch.
Most of West Yorkshire is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Making good around the fan and checking that it extracts properly at the grille
- Rigid or semi-rigid ducting kept short and straight, and insulated where it crosses a cold loft
- Run-on timer, humidistat or light-linked switching set up to suit how the room is used
- Core-drilling through the wall, or ducting through the loft to a roof or soffit vent
Decisions to make first
Timer or humidistat
A timer keeps the fan running after the light goes off. A humidistat starts it whenever moisture rises, which suits rooms where people forget.
Replacement air
A fan needs air to replace what it removes, so leave a gap of around 10 mm under the door or fit a door grille. A sealed room starves the fan.
Rules that apply in England
In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.
