What does an en-suite cost in the East Riding of Yorkshire?
Our guide range in the East Riding of Yorkshire is £4,200–£8,400 including VAT. Prices in the East Riding of Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for East Riding of Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in the East Riding of Yorkshire?
Water across much of the East Riding of Yorkshire is hard. If your supply in Kingston upon Hull is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you live in a Kingston upon Hull flat, check the lease before planning a new en-suite, as freeholder consent is often needed for new drainage and vents.
What the job includes
- A door that suits a tight space: inward, outward, sliding or a pocket door
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
Decisions to make first
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Night lighting
A mirror light or low-level LED strip on its own switch lets you use the en-suite at night without the full glare of the ceiling lights.
Rules that apply in England
Forming an en-suite inside an existing bedroom does not normally need planning permission, but it is usually building-regulations work because it adds drainage, ventilation and electrics. All wiring must meet BS 7671, with 30 mA RCD protection on every circuit in the room. A macerator or pumped WC is acceptable only where the home also has a WC on gravity drainage. In a listed building, a new soil or vent pipe through a wall needs listed building consent.
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.