- Postcode districts
- TN38, TN39, TN40
- Nearby
- Hastings, Hailsham and Eastbourne
- Guide price
- £5,000–£10,000
- Typical time on site
- 4–8 working days
- Water
- Hard across most of East Sussex
- Survey
- Free, at your home
What does an en-suite cost in Bexhill-on-Sea?
Guide price in Bexhill-on-Sea: £5,000–£10,000 including VAT, depending on the room and what you choose. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for Bexhill-on-Sea including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Bexhill-on-Sea
We work right across Bexhill-on-Sea — TN38, TN39 and TN40 — and in neighbouring Hastings and Hailsham.
Homes in and around Bexhill-on-Sea vary, so we look at the floor, the walls and the water system before we price anything. For an en-suite in Bexhill-on-Sea, the first question at the survey is always where the waste can reach the soil stack. We quote new en-suites in Bexhill-on-Sea only after checking the drainage route on site, so the price reflects the work your house actually needs.
Most of East Sussex has hard water. If your supply in Bexhill-on-Sea is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- A door that suits a tight space: inward, outward, sliding or a pocket door
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
Decisions to make first
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

