- Postcode districts
- TW3, TW5, TW7
- Nearby
- Hounslow, Heston and Southall
- Guide price
- £5,600–£11,250
- Typical time on site
- 4–8 working days
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does an en-suite cost in Isleworth?
As a guide, budget £5,600 to £11,250 including VAT for an en-suite in Isleworth; your written quote will pin it down. We adjust the national guide for London, where prices are typically about 25% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Isleworth including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Isleworth
We work right across Isleworth — TW3, TW5 and TW7 — and in neighbouring Hounslow and Heston.
London homes in Isleworth often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. If your Isleworth en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit. If your Isleworth home has one bathroom and a good-sized main bedroom, an en-suite is often the change that eases the morning queue.
Supplies across most of Greater London are very hard. If your supply in Isleworth is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
Decisions to make first
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

