- Postcode districts
- M3, M5, M6, M7, M27, M30 + 1 more
- Nearby
- Eccles, Old Trafford and Manchester
- Guide price
- £4,200–£8,500
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does an en-suite cost in Salford?
As a guide, budget £4,200 to £8,500 including VAT for an en-suite in Salford; your written quote will pin it down. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for Salford including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Salford
We cover every part of Salford, including M3, M5, M6 and 4 more postcode districts, and nearby Eccles (1.8 miles) and Old Trafford (2.1 miles).
In a city the size of Salford, parking and access for a skip are worth sorting before the start date — we will ask at the survey. If you live in a Salford flat, check the lease before planning a new en-suite, as freeholder consent is often needed for new drainage and vents. We quote new en-suites in Salford only after checking the drainage route on site, so the price reflects the work your house actually needs.
Most of Greater Manchester is supplied with soft water. If that holds for your street in Salford, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
Decisions to make first
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

