- Postcode districts
- M29, M38, M46
- Nearby
- Atherton, Leigh and Walkden
- Guide price
- £4,200–£8,500
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does an en-suite cost in Tyldesley?
Our guide price for an en-suite in Tyldesley is £4,200–£8,500 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Tiling, lighting and extractor fan
Upgrade
- Walk-in shower or larger tray
New en-suite
- New stud walls, drainage and pump if needed
Guide prices for Tyldesley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Tyldesley
As well as Tyldesley itself (M29, M38 and M46), we survey in Atherton, Leigh and Walkden.
In Tyldesley, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Tyldesley en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit. We quote new en-suites in Tyldesley only after checking the drainage route on site, so the price reflects the work your house actually needs.
Water across much of Greater Manchester is soft. If that holds for your street in Tyldesley, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
Decisions to make first
Night lighting
A mirror light or low-level LED strip on its own switch lets you use the en-suite at night without the full glare of the ceiling lights.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

