- Postcode districts
- AL9, AL10
- Nearby
- Welwyn Garden City, St Albans and Potters Bar
- Guide price
- £4,800–£9,500
- Typical time on site
- 4–8 working days
- Water
- Very hard across most of Hertfordshire
- Survey
- Free, at your home
What does an en-suite cost in Hatfield?
In Hatfield, an en-suite typically costs £4,800–£9,500 including VAT, based on East of England prices. Prices in East of England run at about 6% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for Hatfield including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hatfield
As well as Hatfield itself (AL9 and AL10), we survey in Welwyn Garden City, St Albans and Potters Bar.
In Hatfield, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. For an en-suite in Hatfield, the first question at the survey is always where the waste can reach the soil stack. If your Hatfield home has one bathroom and a good-sized main bedroom, an en-suite is often the change that eases the morning queue.
Water across much of Hertfordshire is very hard. If your supply in Hatfield is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
Decisions to make first
Night lighting
A mirror light or low-level LED strip on its own switch lets you use the en-suite at night without the full glare of the ceiling lights.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.
