- Postcode districts
- SG6
- Nearby
- Letchworth Garden City, Stevenage and Luton
- Guide price
- £4,800–£9,500
- Typical time on site
- 4–8 working days
- Water
- Very hard across most of Hertfordshire
- Survey
- Free, at your home
What does an en-suite cost in Hitchin?
As a guide, budget £4,800 to £9,500 including VAT for an en-suite in Hitchin; your written quote will pin it down. Prices in East of England run at about 6% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Hitchin including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hitchin
In Hitchin we cover SG6; we also cover Letchworth Garden City, 3.2 miles away, and Stevenage.
In Hitchin, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Hitchin en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit. If the en-suite in your Hitchin home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size.
Water across much of Hertfordshire is very hard. If your supply in Hitchin is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
Decisions to make first
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

