En-suites in Dover

Postcode districts: CT14, CT16, CT17
Nearby: Folkestone, Deal and Canterbury
Guide price: £5,000–£10,000
Typical time on site: 4–8 working days
Water: Very hard across most of Kent
Survey: Free, at your home

What does an en-suite cost in Dover?

Guide price in Dover: £5,000–£10,000 including VAT, depending on the room and what you choose. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Refit

£4,500–£7,800

Tiling, lighting and extractor fan

Typical

Upgrade

£6,700–£10,750

Walk-in shower or larger tray

New en-suite

£7,800–£15,750

New stud walls, drainage and pump if needed

Guide prices for Dover including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Dover

In Dover we cover CT14, CT16 and CT17; we also cover Folkestone, 7 miles away, and Deal.

Homes in and around Dover vary, so we look at the floor, the walls and the water system before we price anything. For an en-suite in Dover, the first question at the survey is always where the waste can reach the soil stack. If your Dover en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit.

Supplies across most of Kent are very hard. If your supply in Dover is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Tiling, silicone, testing and making good on the bedroom side of any new walls
A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
Stud walls with acoustic insulation and moisture-resistant board for a new en-suite

Decisions to make first

Noise

Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.

Exposed or concealed valve

An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.

Rules that apply in England

In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

More about en-suites

En-suites in Dover: questions

What is the price of an en-suite in Dover?

An en-suite in Dover usually costs £5,000–£10,000 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the water hard in Dover?

Who handles building control for an en-suite in Dover?

Building control for Dover is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does an en-suite take?

Allow 4–8 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Dover.

How much space do you need for an en-suite?

As a rough guide, about 2.5 m² is the practical minimum for a shower, basin and WC, for example a space of around 1.2 m by 2.1 m. The exact layout depends on where the door, window and soil stack are, so we test it against your measurements rather than a rule of thumb.