- Postcode districts
- G74
- Nearby
- Cambuslang, Blantyre and Rutherglen
- Guide price
- £4,300–£8,600
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Lanarkshire
- Survey
- Free, at your home
What does an en-suite cost in East Kilbride?
Our guide price for an en-suite in East Kilbride is £4,300–£8,600 including VAT. Prices in Scotland run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for East Kilbride including VAT. Your itemised written quote after the free survey is the price that counts.
Working in East Kilbride
We cover every part of East Kilbride, including G74, and nearby Cambuslang (3.2 miles) and Blantyre (3.9 miles).
East Kilbride has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. We quote new en-suites in East Kilbride only after checking the drainage route on site, so the price reflects the work your house actually needs. For an en-suite in East Kilbride, the first question at the survey is always where the waste can reach the soil stack.
Water across much of Lanarkshire is soft. If that holds for your street in East Kilbride, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
Decisions to make first
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Rules that apply in Scotland
In Scotland, forming a new en-suite may need a building warrant because it creates a new bathroom and alters drainage; refitting an existing one rarely does. The Technical Handbook uses the same 15 litres per second extract rate for a bathroom, and the electrics should be tested and certified to BS 7671.

