- Postcode districts
- L31
- Nearby
- Kirkby, Litherland and Ormskirk
- Guide price
- £4,200–£8,500
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does an en-suite cost in Maghull?
For Maghull, our guide range for an en-suite is £4,200 to £8,500 including VAT. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Tiling, lighting and extractor fan
Upgrade
- Walk-in shower or larger tray
New en-suite
- New stud walls, drainage and pump if needed
Guide prices for Maghull including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Maghull
We work right across Maghull — L31 — and in neighbouring Kirkby and Litherland.
Homes in and around Maghull vary, so we look at the floor, the walls and the water system before we price anything. For an en-suite in Maghull, the first question at the survey is always where the waste can reach the soil stack. If your Maghull home has one bathroom and a good-sized main bedroom, an en-suite is often the change that eases the morning queue.
Most of Merseyside is supplied with soft water. If that holds for your street in Maghull, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A door that suits a tight space: inward, outward, sliding or a pocket door
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
Decisions to make first
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.
