- Postcode districts
- NR19, NR20
- Nearby
- Norwich, Thetford and King's Lynn
- Guide price
- £4,800–£9,500
- Typical time on site
- 4–8 working days
- Water
- Very hard across most of Norfolk
- Survey
- Free, at your home
What does an en-suite cost in East Dereham?
In East Dereham, an en-suite typically costs £4,800–£9,500 including VAT, based on East of England prices. Labour costs in East of England put local prices at about 6% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Tiling, lighting and extractor fan
Upgrade
- Walk-in shower or larger tray
New en-suite
- New stud walls, drainage and pump if needed
Guide prices for East Dereham including VAT. Your itemised written quote after the free survey is the price that counts.
Working in East Dereham
As well as East Dereham itself (NR19 and NR20), we survey in Norwich, Thetford and King's Lynn.
Being a smaller town does not change how we work in East Dereham: free survey, written quote, one team. For an en-suite in East Dereham, the first question at the survey is always where the waste can reach the soil stack. We quote new en-suites in East Dereham only after checking the drainage route on site, so the price reflects the work your house actually needs.
Water across much of Norfolk is very hard. If your supply in East Dereham is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- A door that suits a tight space: inward, outward, sliding or a pocket door
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
Decisions to make first
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

