- Postcode districts
- S5, S35, S74
- Nearby
- Hoyland Nether, Wombwell and Rawmarsh
- Guide price
- £4,200–£8,400
- Typical time on site
- 4–8 working days
- Water
- Moderately hard across most of South Yorkshire
- Survey
- Free, at your home
What does an en-suite cost in Chapeltown?
Guide price in Chapeltown: £4,200–£8,400 including VAT, depending on the room and what you choose. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Chapeltown including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Chapeltown
As well as Chapeltown itself (S5, S35 and S74), we survey in Hoyland Nether, Wombwell and Rawmarsh.
Chapeltown gets the same process as anywhere else: a free survey at your home and a written, itemised quote. For an en-suite in Chapeltown, the first question at the survey is always where the waste can reach the soil stack. If the en-suite in your Chapeltown home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size.
Supplies across most of South Yorkshire are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Chapeltown. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A door that suits a tight space: inward, outward, sliding or a pocket door
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
Decisions to make first
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

