- Postcode districts
- CV12
- Nearby
- Nuneaton, Coventry and Hinckley
- Guide price
- £4,400–£8,800
- Typical time on site
- 4–8 working days
- Water
- Hard across most of Warwickshire
- Survey
- Free, at your home
What does an en-suite cost in Bedworth?
Our guide price for an en-suite in Bedworth is £4,400–£8,800 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Tiling, lighting and extractor fan
Upgrade
- Walk-in shower or larger tray
New en-suite
- New stud walls, drainage and pump if needed
Guide prices for Bedworth including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Bedworth
As well as Bedworth itself (CV12), we survey in Nuneaton, Coventry and Hinckley.
Homes in and around Bedworth vary, so we look at the floor, the walls and the water system before we price anything. If your Bedworth en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit. We quote new en-suites in Bedworth only after checking the drainage route on site, so the price reflects the work your house actually needs.
Supplies across most of Warwickshire are hard. If your supply in Bedworth is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- A door that suits a tight space: inward, outward, sliding or a pocket door
Decisions to make first
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

