- Postcode districts
- WF14
- Nearby
- Liversedge, Heckmondwike and Dewsbury
- Guide price
- £4,200–£8,400
- Typical time on site
- 4–8 working days
- Water
- Soft across most of West Yorkshire
- Survey
- Free, at your home
What does an en-suite cost in Mirfield?
For Mirfield, our guide range for an en-suite is £4,200 to £8,400 including VAT. Prices in Yorkshire and the Humber run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for Mirfield including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Mirfield
In Mirfield we cover WF14; we also cover Liversedge, 2.2 miles away, and Heckmondwike.
Mirfield gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Mirfield en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit. If your Mirfield home has one bathroom and a good-sized main bedroom, an en-suite is often the change that eases the morning queue.
Water across much of West Yorkshire is soft. If that holds for your street in Mirfield, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- A door that suits a tight space: inward, outward, sliding or a pocket door
Decisions to make first
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

