What does a family bathroom cost in Perth and Kinross?
Our guide range in Perth and Kinross is £5,800–£10,500 including VAT. Prices in Perth and Kinross run at about 4% below the UK guide, based on Scotland labour rates.
Essential
- White suite, chrome taps
Signature
- Porcelain tiles, heated towel rail
Bespoke
- Separate bath and shower
Guide prices for Perth & Kinross including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Perth and Kinross?
Supplies across most of Perth and Kinross are soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are refreshing a family bathroom in Perth before selling, keeping the layout lets the budget go on the suite, tiles and shower.
What the job includes
- New pipework, wastes and isolation valves, plus a thermostatic shower valve so the temperature holds when someone runs a tap
- Lights, extractor fan and towel rail wired by a qualified electrician, tested and certified
- Wall and floor tiling, with a floor finish chosen to grip under wet feet
- Moisture-resistant boarding and tanking around the bath and shower before any tiling
- A layout that keeps a full-size bath, with options for a shower over it or a separate enclosure if the room allows
- Strip-out of the old suite and tiles, with the waste taken away by a licensed waste carrier
Decisions to make first
Screen or curtain
Glass keeps water in better than a curtain and does not go mouldy at the hem. A folding or hinged screen swings out of the way when you are kneeling to bath a child.
Floor
Matt or textured porcelain is the hardest-wearing option. Luxury vinyl tile (LVT) is warmer, quieter and cheaper to lay. Avoid polished tiles where children climb out of the bath.
Shower over the bath or separate
A shower over the bath with a fixed or hinged screen is the most space-efficient. A separate enclosure needs roughly another square metre of floor but means the bath queue no longer holds up the shower queue.
Bath material
Reinforced acrylic is warm to the touch and light on the floor. Steel enamel is harder-wearing and feels more solid, but it draws heat from the water faster.
Rules that apply in Scotland
Refitting a family bathroom in the same room does not need planning permission. The electrics must meet BS 7671, with 30 mA RCD protection on every circuit in the room and at least IPX4 fittings in the zone above the bath, up to 2.25 m. The water fittings rules in each nation limit a new WC to a 6-litre flush and require protection against dirty water flowing back into the supply.
In Scotland there is no Part P. A straight replacement of a family bathroom rarely needs a building warrant, but altering the drainage or forming a bathroom in a different room may. Water fittings are covered by the Scottish Water Byelaws 2014, and the electrics should be tested and certified to BS 7671.